Eppendorf epMotion 96 User Manual download pdf (Page 56)

Operation

epMotion

English (EN)

6.15.2 Set the pipetting properties

Abb. 6-10: Pi petting Settings

Fig. 6-10: Pipetting Settings

6.15.3 Liquid Types – Setting the liquid properties

The liquid properties allow adjusting the pipetting to liquids with densities or vapour pressures that differ

sigificantly from those of water. The preset Standard is used for verifying the device and is suitable for

water and diluted aqueous solutions.

Parameter Value Pipette tips Default settings

Reverse stroke (μL) Setting the additional volume for the

liquid aspiration in μL.

50 μL 3 μL

300 μL 12 μL

Remaining stroke (μL) Setting the residual volume in μL for

liquid aspiration in Multidispense mode.

50 μL 4 μL

300 μL 12 μL

Blow-out (uL) Setting the air volume in μL for

dispensing the residual liquid.

50 μL 15 μL

300 μL 20 μL

Piston Pause (s) Setting the delay time between pipetting

operations in seconds.

–1 s

Auto Delay (s) Setting the delay time for automatic

liquid dispensing in seconds

(Multidispense mode).

–1 s

1 2 ... 51 52 53 54 55 56 57 58 59 60 61 ... 75 76

No comments

Eppendorf epMotion 96 User Manual Page 56