Operation
epMotion
®
96
English (EN)
40
6.8 Mode Pipette – Dispensing liquid
Aspirating liquid in one step and dispensing liquid in one step.
Abb. 6-1: Mode Pipette
Fig. 6-1: Mode Pipette
6.8.1 Aspirating liquid
Prerequisites
• Source vessel is available.
1. Put the source vessel onto the lifting table and move the lifting table into working position.
2. Set the aspiration volumes and the speed levels.
3. Press Aspirate.
6.8.2 Dispensing liquid
Prerequisites
• Liquid has been aspirated.
• Destination vessel is available.
1. Put the destination vessel onto the lifting table and move the lifting table into working position.
2. Press Dispense.
Parameter Value Range of values
Speed aspirate Setting the speed of the liquid aspiration. 1 – 9
Speed dispense Setting the speed of the liquid dispensing. 1 – 9
Volume Setting the aspiration volume in μL. 0.5 – 300 (increment of 0.1)
Comments to this Manuals