Eppendorf epMotion 96 User Manual download pdf (Page 35)

Operation

epMotion

English (EN)

6.4.2 Moving the lifting table into basic position

6.4.3 Setting the stop for the lifting table

The stop defines the end position of the lifting table in the working position. It makes sense to use the stop

when filling several plates.

Prerequisites

• The stop is in the basic position.

6.5 Aspirating liquid

Prerequisites

• The device is switched on.

• The software has been started.

• The pipette tips are attached.

1. Put the source vessel onto the lifting table.

2. Select the operating mode.

3. Set the aspiration volume.

4. Set the parameters.

5. Move the lifting table into the working position until the pipette tips are immersed in the liquid.

1. Hold the lifting table and loosen the locking

handle.

2. Move the lifting table into the basic position.

Source vessel or destination vessel can be

replaced.

Pipette tips can be inserted.

1. Move the lifting table into working position.

2. Tighten the locking handle on the lifting table.

3. Tighten the locking handle for the stop.

The working position is fixed.

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 75 76

No comments

Eppendorf epMotion 96 User Manual Page 35