Eppendorf Pipette Reference 2 User Manual download pdf (Page 30)

Maintenance

Eppendorf Reference

English (EN)

6.5.2 Changing the user adjustment

If the adjustment is changed, the volume changes by a certain value. Strictly speaking, the change only

applies to the testing volume.

Example:

You readjust a 10 – 100 µL pipette with a volume setting of 100 µL by 1 µL (1 µL  1

%). If the volume

setting is 10 µL, the pipette is also adjusted by 1 µL ( 10

%).

Auxiliary aids from the delivery package

• Pin

• Red plastic adjustment seal (ADJ)

1. Insert the pin in the middle of the gray adjustment seal (ADJ).

2. Remove the adjustment seal.

3. Insert the adjustment tool.

4. Turn the adjustment tool until the adjustment display shows the desired value.

6. Carry out weighings to check the accuracy and precision.

7. Attach the red adjustment seal after the inspections.

If the adjustment is meant for a specific liquid, mark the pipette accordingly. Use the labeling area on the

pipette for this, and write down the liquid and the volume. Carry out a gravimetric test for each adjustment

change. Follow the EN ISO 8655-2 and EN ISO 8655-6 test procedures. A Standard Operating Procedure

(SOP) and further information on user and factory adjustment settings can be found on the Reference 2 CD

and on our website

www.eppendorf.com.

5. Read the set value distortion-free using the aligning aid in

the viewing window.

ADJ

1000 µL

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 43 44

No comments

Eppendorf Pipette Reference 2 User Manual Page 30