Eppendorf ThermoMixer C User Manual download pdf (Page 34)

Operation

Eppendorf ThermoMixer

English (EN)

5.9.5 Loading a saved program

5.9.5.1 Loading program prog 1 to prog 5

On supply, the prog 1 to prog 5 program keys are assigned as follows:

1. In order to call up a program on the program spaces 1 to 5, press one of the program

keys prog 1 to prog 5.

• The LED above the program key lights blue.

• The display shows the parameters of the program.

2. In order to start the program, press the start/stop key.

5.9.5.2 Loading a program from the program list

1. In order to load a program from the program list, select the program under Menu >

Programs. Confirm with the menu/enter key.

2. Use the menu arrow keys to select the Load menu item. Confirm with the menu/enter

key.

• The display shows the parameters of the program.

• Programs with several program levels:

The display shows the parameters of the first program level. To display the

parameters of the other program levels, use the ◄ or ► menu arrow keys to select

the corresponding step.

3. In order to start the program, press the start/stop key.

The asterisk marks the active program level Step 1. The display shows the parameters

of Step 2.

Program name Temperature Mixing time/

temperature

control duration

Mixing

frequency

prog 1 key Cooling 8°C ∞ 0 rpm

prog 2 key Ligation 16°C 16:00 h 0 rpm

prog 3 key Restr. Digest 37°C 1:00 h 1 000 rpm

prog 4 key Prot. K Digest 56°C 10:00 min 1 000 rpm

prog 5 key Denaturation 95°C 30:00 min 0 rpm

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 53 54

No comments

Eppendorf ThermoMixer C User Manual Page 34