Eppendorf ThermoMixer FP User Manual download pdf (Page 15)

Installation

Eppendorf ThermoMixer

F0.5/F1.5/F2.0/FP

English (EN)

4 Installation

4.1 Selecting the location

Select the device location according to the following criteria:

• Mains/power connection in accordance with the name plate

• Minimum distance to other devices and walls: 10 cm (3.9 in)

• Resonance free table with horizontal even work surface

• The design of table is suitable for operating the device.

• Surrounding area must be well ventilated.

• The location must be protected against direct sunlight.

4.2 Installing the instrument

1. Place the Eppendorf ThermoMixer F0.5/F1.5/F2.0/FP on a suitable work surface.

Position the device in such a way that the ventilation slots of the device are not

obstructed.

2. Connect the power cable to the power connection socket of the device and the power

supply.

The mains/power switch and cutting unit of the mains/power line must be easily

accessible during operation (e.g., residual current circuit breaker).

WARNING! Risk from incorrect supply voltage

 Only connect the device to voltage sources which correspond to the electrical

requirements on the name plate.

 Only use sockets with a protective earth (PE) conductor and suitable power

cable.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 39 40

No comments

Eppendorf ThermoMixer FP User Manual Page 15