Eppendorf ThermoStat plus User Manual download pdf (Page 22)

7 Maintenance

ThermoStat plus — Operating Manual

7 Mainten ance

7.1 Cleaning

Regularly clean the housing of the ThermoStat plus and the exchangeable thermoblocks.

Auxiliary aids

• Lint free cloth

• Mild, soap-based household cleaning agent

• Dist. water

Cleaning the ThermoStat plus

1. Switch the ThermoStat plus off and isolate from the power supply.

2. Clean all of the outer parts of the ThermoStat plus with a mild, soap-based solution and a

lint-free cloth.

3. Wipe off the soap solution with dist. water.

4. Dry all cleaned parts.

Cleaning exchangeable thermoblocks

 Remove any contamination with a damp, lint-free cloth. Use a mild lab cleaner if necessary.

DANGER!

Danger! Electric shock as a result of penetration of liquid.

 Switch off the device and disconnect it from the power supply before starting

cleaning or disinfecting.

 Do not allow any liquids to enter the inside of the housing.

 Do not perform spay disinfection.

 Only reconnect the device to the power supply once it is completely dry.

CAUTION!

Caution when using aggressive chemicals.

Aggressive chemicals may damage both the device and its accessories.

 Do not use any aggressive chemicals on the device and accessories such as strong

or weak bases, strong acids, acetone, formaldehyde, halogenated hydrocarbons or

phenol.

 If the device becomes contaminated with aggressive chemicals, clean it

immediately with a neutral cleaning agent.

CAUTION!

Caution! Corrosion from aggressive cleaning agents and disinfectants.

 Do not use corrosive cleaning agents, aggressive solvents or abrasive polishes.

Operating Manual

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 32 33

No comments

Eppendorf ThermoStat plus User Manual Page 22